• 300 Pennsylvania Ave NW, Washington, DC 20006, USA

9041 Ultra II CBM Data Collector, Vibration Analyser & Balancer

The TPI Model 9041 Ultra II represents the very latest in easy to use high specification maintenance tools, offering extremely high levels of functionality and capability at a very affordable price!

Description

As a high spec condition based monitoring (CBM) data collector and Dynamic 2 plane rotor balancer designed for plant and asset inspections, the Ultra II does it all.

  • Automatically detects out of balance, misalignment, looseness and bearing defects
  • Predictive analysis capabilities that accurately calculate time frame to failure
  • Condition based monitoring analyses bearing wear and gear degradation
  • Built-in single plane balancing enables correction of the most common cause of vibration. (Dual plane balancing with additional accelerometer)
  • Additional features include Inspection, Lube and remote/server database
  • User selectable defined envelope filters and demodulation functionality
  • True simultaneous 3 channel capture
  • High resolution (0.2Hz) frequency spectra from 2Hz to 10kHz
  • Rugged fully waterproof construction meets IP68 and MIL-STD-810F requirements
  • Includes C-Trend powerful and easy to use asset management and fault diagnosis software
 Model 9041 Ultra II Specifications
 Size  8.7” x 3.7” x 1.8” (220 mm x 95mm x 45mm)
 Weight  1.1 lb (500g)(not including accelerometer)
 Environmental  Water: MIL-STD-810F, Method 512.4
IP67 sealed against accidental immersing
(1m for 30 min)Drop: MIL-STD-810F, Method 516.5, Procedure IV
26 drops from 1.22 m
6 additional drops at -4°F (-20°C)
6 additional drops at 140°F (60°C)Operating: -22° to 149°F (-30° to 65°C)Storage: -40° to 158°F (-40° to 70°C)Humidity: MIL-STD-810F, Method 507.4

Sand and Dust: IP67, Mil-STD-810F, Method 510.4,
Procedures I and II

 Power supply  Rechargeable battery (charger included)
 Battery life  Typically 20 hours operating time
depending on backlight usage.
 Frequency ranges  2 Hz to 1 kHz
2 Hz to 10 kHz
 Frequency Resolution  Up to 0.02 Hz
400, 800, 1600, 3200, 6400,12800, 25,600
or 51,200 lines FFT
 Displayed Amplitude Units  Acceleration in g
Velocity in mm/s ( or inches/s)
Bearing noise in BDU (bearing
damage units)
Displacement in Microns/Mils
 Displayed Frequency Units  Hertz (Hz), RPM or CPM
 Dynamic range  96 dB +/- 50g to +/- 50g with
standard accelerometer
 Auto set up of VA diagnostic bands
(RPM = run speed)
 Instability, unbalance, misalignment & diagnostic bands looseness
 Envelope demodulation filters  Fully user selectable high pass and low
pass filter cut off frequencies
 IEPE accelerometer interface  Constant current accelerometer power
supply (+20 volts @ 2mA) can be switched
off for use w/ BNC output control panels
Supplied with BNC connection lead
 Numeric Keypad or Touch screen
operation
 Stylus free collection of vibration data using
numeric key pad or by touching screen
 Included accessories  • Tachometer, accelerometer (one) and cables,
tachometer mount adapter
• Carrying case with shoulder strap